THE COMPONENTS FORMED HIGH PERFORMANCE MAYK DOOR SETS
A FIRE PERFORMANCE OF A REAL FIRE DOOR MUST BE PROVEN BY TESTED AS A WHOLE WITH ALL ITS COMPONENTS.

The tests must be carried out in internationally accredited fire test laboratories in accordance with TS EN 1634-1 and BS 476/22 test standards. With having its hundreds of fire test proofs, MAYK Door Sets provide components that allow wooden fire doors to be produced in accordance with specified standards, certified and required technical details. OUR DOORS PRODUCED WITH MAYK ASSURANCE ARE APPROVED BY ALL OFFICIAL AUTHORITIES, FIRE OFFICES, MUNICIPALITIES, CONSTRUCTION INSPECTION FIRMS, INTERNATIONAL TOUR OPERATORS AND HOTEL CHAINS. ALL DOORS MANUFACTURED USING MAYK DOOR SETS MEET THE FIRE REGULATION CRITERIA.

30, 60, AND 90 MINUTES FIRE-RESISTANT

EI30-S/ EI60-S/ EI90-S

Fire-resistant room doors isolate possible fire in the room for specified periods. They also provide life and property safety by preventing the flame and smoke from spreading to other parts of the building by leaving the room.

WHAT TO EXPECT?

1.Fire and Smoke Performance: EI30-S,EI60-S and EI90-S test proof in accordance with BS 476/22 or EN 1634-1 standards
2.Acoustic insulation: Test proof from internationally accredited sound laboratories
3.Durability: EN 1191 on-off test proof

THE HARDWARE MUST HAVE BEEN TESTED TOGETHER

  • FIRE-RESISTANT DOOR CLOSER
  • FIRE-RESISTANT HINGES
  • FIRE-RESISTANT LOCK
  • FIRE-RESISTANT DOOR HANDLE
  • FIRE-RESISTANT DOOR LEAF
  • FIRE-RESISTANT WICK
  • FIRE-RESISTANT GUILLOTINE

According to the required fire resistance performance, MDF, soft/hard wood, aluminum or    steel frames can be used as door frames.

Fire-resistant, 3-layer solid particle board that is formed by compression with special chemicals is supplied as a part of the set for door leaf. On this board Veneer, MDF, HPL or directly paint can be applied.

1- DOOR LEAF

Manufactured by advanced chemical and technical methods, using a 3-layer monoblock particle board specially developed for door leaf.

2- HINGES

Backflap, hanger or blind hinges with fire resistance tested according to BS476/22 and EN 1634-1 tests.

3- DOOR CLOSER

The door closer, tested fire resistance, and suitable for schools, public buildings, offices, hotels and hospitals.

4- LOCK AND PROTECTION KIT

Fire-resistant locks with protective pads.

5- WICKS

Fire and smoke wicks: Prevent the formation of cold smoke, hot smoke and fire passage.

6- GUILLOTINE

Provides closing the gap between the bottom of the door and the thresholdl, fire and smoke tightness, acoustic insulation and lightproofing.

  • According to the required fire resistance performance, MDF, soft/hard wood, aluminum or    steel frames can be used as door frames.

  • Fire-resistant, 3-layer solid particle board that is formed by compression with special chemicals is supplied as a part of the set for door leaf. On this board Veneer, MDF, HPL or directly paint can be applied.