EYDK-45 SERIES E 90, EI 90, EI 45

Our fire doors, which are designed with high quality with double-sided door leaf and easy-to-install hinges, have fire resistance classifications of E 90 , EI₂ 90 and EI₂ 45 by an accredited laboratory in accordance with the procedures specified in EN 1363-1 and according to EN 13501-2 standard.

Double-sided, double leaf fire door “EYDK-K45” is mounted on walls made of gas concrete blocks with a density of 650 kg/m3, 200 mm thick, with mounting dimensions of 1600 mm x 2150 mm (width x height)

Frame:

Frame posts and head that are made of 1.5 mm-galvanized sheet are welded to each other. Combining is provided by welding method. The gaps between the supporting structure and the frame are filled with polyurethane foam. The steel frame is fixed to the supporting structure with screws. A heat-inflating wick is used on the frame board. The frames have a graphite joint that is able to expand according to the wall thickness.

Leaf:

It is made of 1.20 mm thick-sheet metal in two parts. The thickness of leaf is 64 mm. Intumescent heat wick tapes are used on the side surfaces of leaf, which is overlapped on 4 sides and between the leaf and the frame.

The table below indicates the maximum and minimum dimensions allowed by the classification report of the door with the serial number “EYDK-45”, which was tested.  Fire resistance class may vary in fire doors to be preferred outside of these dimensions.

CATEGORY(A) FIRE RESISTANCE CLASS WIDTH (mm) HEIGHT (mm) FRAME SHEET THICKNESS (mm) DECORATIVE COATING
max. min. max. min. max. min. ✔
EYDK-K45 DOOR DIMENSIONS E 90 , EI 90 , EI 45 1550 850 2130 1650 2 1,5
CATEGORY(B) FIRE RESISTANCE CLASS WIDTH (mm) HEIGHT (mm) FRAME SHEET THICKNESS (mm) DECORATIVE COATING
max. min. max. min. max. min. ✔
EYDK-K45 DOOR DIMENSIONS E 90 , EI 60 , EI 45 1795 850 2556 1650 2 1,5

CATEGORY A: It defines the dimensions of the tested door and the strength class it provides.
CATEGORY B: It defines the maximum fire resistance class of the tested door dimensions.

Sizes in the table are in mm. In this table you find the standard dimensions. You can select by the model number for these doors, which are suitable for each building type

MODEL WALL TO WALL INNER CASE SIZE TOTAL SIZE 
Width
(A)
Height
(B)
Width
(a)
Height
(b)
WIDTH HEIGHT
min. max. min. max.
EYDK-K45-150205100 1550 1600 2080 2100 1500 2050 1650 2125
EYDK-K45-150210200 2130 2150 2100 2175
EYDK-K45-150215300 2180 2200 2150 2225
EYDK-K45-160205100 1650 1700 2080 2100 1600 2050 1750 2125
EYDK-K45-160210200 2130 2150 2100 2175
EYDK-K45-160215300 2180 2200 2150 2225
EYDK-K45-170205100 1750 1800 2080 2100 1700 2050 1850 2125
EYDK-K45-170210200 2130 2150 2100 2175
EYDK-K45-170215300 2180 2200 2150 2225
EYDK-K45-180205100 1850 1900 2080 2100 1800 2050 1950 2125
EYDK-K45-180210200 2130 2150 2100 2175
EYDK-K45-180215300 2180 2200 2150 2225
1
2
3
4
5
6

1-Brick and rigid block, with wall-mounted, welded mounting support plate, and non-adjustable fixed frame.
2-Brick and rigid block with wall-mounted and non-adjustable fixed frame.
3-Brick and rigid block, with wall-mounted, narrow sill, fixed without profile, and fixed frame without adjustment.
4-Brick and rigid block with wall-mounted, wide sill, fixed without profile, fixed frame without adjustment.
5-Twist mounted on concrete wall with steel dowels, 50 mm-adjustable frame, and without roving slot.
6-Twist mounted to concrete wall with steel dowels, 50mm-adjustable frame, and roving slot.

1
2
3
4
5

1-The threshold is smooth, without details.
2-Smoke-proof, lowerable guillotine.
3-The threshold of level difference.
4-The threshold type doors with air and sound protection gaskets with wick slots,
5-Sided frame and intumescent roving finish.

  • 2 pieces of ELPA brand CE certified hinges made of galvanized steel material with the dimensions of 25 x 160 x 3 mm (Ø x l x t) are used on each leaf.
  • It is positioned at a distance of 260 mm from the top and bottom of the door leaf, and at a distance of 35 mm from the edge of the leaf.
  • Hinges with ELPA patent have been tested with the door and also have fire-resistance class.
  • Steel hinges mounted on the frame and the leaf surface are easy to install.
  • The protective covers of steel hinges have a wide range of colors that can be used in harmony with the door accessory.
PRODUCT CHARACTERISTICS
Size 160 mm
ø Cylinder Diameter 25 mm
Material thickness 3 mm
DIN left / DIN right    ▪
Frame Type Steel    ▪
Suitable for Fire Doors    ▪
Load capacity Class 11 (maximum door load) Spring hinge max 80 kg
KO-Band 100 kg
Norm 80 kg
Finished Surface Steel zinc plated
frame and door parts
   ▪
Hinge Type Three-piece standard hinge,
laser welded
Return Technology Cleared Rotation ▪
Ball Bearing NO
Fixing Screwed to the leaf frame welded to the door frame

The explanations given below describe the type/model of the door.

PRODUCT DETAILS
FRAME 1.50 mm thick sheet metal and adjustable additional casing with 50 mm tolerance
LEAF 1.00 mm thick sheet metal and one-way DIN right/left opening
HINGE 1 spring and 1 springless adjustable steel hinge suitable for bidirectional use (EM200-ELPA)
DOOR HANDLE 1 Piece U Type Black Handle (NEMEF)
PANICBAR 1 Panic Bar (EP300-ELPA)
MORTISE LOCK 1 Piece Panic Function Mortise Type Steel Lock (NEMEF)

PAINT EQUIPMENT

The frame surface and the both surfaces of leaf are lined, electrostatic powder paint is applied to them by a thickness of 70 microns, and they are fired at a minimum temperature of 200ºC.

ELPADOOR doors allow you to use the color design you want in your projects via high quality paint and paint techniques.

kapi kaplama

COATING SURFACE

Doors play an important role in your functional and stylish building designs.

ELPADOOR doors help you in your designs by a wide range of laminate coating options instead of choosing a single material.