EYDK03 SERIES EI₂ 120 / E 120 / EI₂ 60
Our fire doors, which are designed with high quality, door leaf suitable for double-sided use, and easy-to-install hinges, have fire resistance classifications of EI₂ 120, E 120 and EI₂ 60 by an accredited laboratory according to EN 13501-2 standard. As well as high fire classification
ELPADOOR Doors offer comprehensive options in your projects via maximum door sizes.
Tested single-sided door construction, single leaf steel fire door “EYDK-03” is mounted on a masonry carrier construction. The supporting structure is mounted on a wall made of 450kg/m³- aerated concrete blocks with a thickness of 200 mm, with mounting dimensions of 1097 mm x 2099 mm (width x height).
Frame posts and head that are made of 1.5 mm-galvanized sheet are welded to each other. Combining is provided by welding method. The gaps between the supporting structure and the frame are filled with polyurethane foam. The steel frame is fixed to the supporting structure with screws. A heat-inflating wick is used on the frame board. The frames have a graphite joint that is able to expand according to the wall thickness.
It is made of 1.00 mm thick-sheet metal in two parts. The thickness of leaf is 64 mm. Intumescent heat wick tapes are used on the side surfaces of leaf, which is overlapped on 4 sides and between the leaf and the frame.
The table below indicates the maximum and minimum dimensions allowed by the classification report of the door with the serial number “EYDK-03”, which was tested. Fire resistance class may vary in fire doors to be preferred outside of these dimensions.
|CATEGORY(A)||FIRE RESISTANCE CLASS||WIDTH (mm)||HEIGHT (mm)||FRAME SHEET THICKNESS (mm)||DECORATIVE COATING|
|EKP03 DOOR DIMENSIONS||E 120 , EI 120, EI 60||1000||500||2050||510||2||1,5|
|CATEGORY(B)||FIRE RESISTANCE CLASS||WIDTH (mm)||HEIGHT (mm)||FRAME SHEET THICKNESS (mm)||DECORATIVE COATING|
|EKP03 DOOR DIMENSIONS||E 90 , EI 90 , EI 45||1150||500||2358||510||2||1,5|
CATEGORY A: It defines the dimensions of the tested door and the strength class it provides.
CATEGORY B: It defines the maximum fire resistance class of the tested door dimensions.
Sizes in the table are in mm. In this table you find the standard dimensions. You can select by the model number for these doors, which are suitable for each building type
|MODEL||WALL TO WALL||INNER CASE SIZE||TOTAL SIZE|
1-Brick and rigid block, with wall-mounted, welded mounting support plate, and non-adjustable fixed frame.
2-Brick and rigid block with wall-mounted and non-adjustable fixed frame.
3-Brick and rigid block, with wall-mounted, narrow sill, fixed without profile, and fixed frame without adjustment.
4-Brick and rigid block with wall-mounted, wide sill, fixed without profile, fixed frame without adjustment.
5-Twist mounted on concrete wall with steel dowels, 50 mm-adjustable frame, and without roving slot.
6-Twist mounted to concrete wall with steel dowels, 50mm-adjustable frame, and roving slot.
1-The threshold is smooth, without details.
2-Smoke-proof, lowerable guillotine.
3-The threshold of level difference.
4-The threshold type doors with air and sound protection gaskets with wick slots,
5-Sided frame and intumescent roving finish.
- 2 pieces of ELPA brand CE certified hinges made of galvanized steel material with the dimensions of 25 x 160 x 3 mm (Ø x l x t) are used on each leaf.
- It is positioned at a distance of 260 mm from the top and bottom of the door leaf, and at a distance of 35 mm from the edge of the leaf.
- Hinges with ELPA patent have been tested with the door and also have fire-resistance class.
- Steel hinges mounted on the frame and the leaf surface are easy to install.
- The protective covers of steel hinges have a wide range of colors that can be used in harmony with the door accessory.
|ø Cylinder Diameter||25 mm|
|Material thickness||3 mm|
|DIN left / DIN right|
|Suitable for Fire Doors|
|Load capacity Class 11 (maximum door load)||Spring hinge max||80 kg|
|Finished Surface||Steel zinc plated
frame and door parts
|Hinge Type||Three-piece standard hinge,
|Return Technology||Cleared Rotation|
|Fixing||Screwed to the leaf frame welded to the door frame|
- The lever mechanism is highly cranked and permits the use of electrical key cylinders.
- The panicbar have been tested in accordance with EN 1125, and are suitable for usage in fire doors.
- It is screwed to the handle and the pipe by high strength.
The explanations given below describe the type/model of the door.
|FRAME||1.50 mm thick sheet metal and adjustable additional casing with 50 mm tolerance|
|LEAF||1.00 mm thick sheet metal and one-way DIN right/left opening|
|HINGE||1 spring and 1 springless adjustable steel hinge suitable for bidirectional use (EM200-ELPA)|
|DOOR HANDLE||1 Piece U Type Black Handle (NEMEF)|
|PANICBAR||1 Panic Bar (EP300-ELPA)|
|MORTISE LOCK||1 Piece Panic Function Mortise Type Steel Lock (NEMEF)|
The frame surface and the both surfaces of leaf are lined, electrostatic powder paint is applied to them by a thickness of 70 microns, and they are fired at a minimum temperature of 200ºC.
ELPADOOR doors allow you to use the color design you want in your projects via high quality paint and paint techniques.
Doors play an important role in your functional and stylish building designs.
ELPADOOR doors help you in your designs by a wide range of laminate coating options instead of choosing a single material.